ControlLED LED Control Unit controls Dio-Tech satellite LED fixtures and infill bars, the controller is both touch screen an WiFi ready and can be bought with a sensor that measures temperature, humidity and C02.
£349.95 inc VAT
ControlLED LED Control Unit controls Dio-Tech satellite LED fixtures and infill bars, the controller is both touch screen an WiFi ready and can be bought with a sensor that measures temperature, humidity and C02.
The on screen display lets you know all the information that is necessary to properly control all your environmental factors, including what spectrum your lights are outputting.
The main features are as follows when used with the satellite fixture:
This allows the user to set the fixture/s to turn on for a predetermined period after the UVA/FAR red bars come on. For example:
The sunrise period starts at 8am and continues for a predetermined time (max 100 minutes) until the fixture is on at full capacity, the UVA/FAR red bars would ignite at full capacity at the start period 8am, this is because the infill bars can not be dimmed, they are either on or off. The full fixture would turn on at 8am and increase in wattage evenly through the predetermined time until they are up to the intensity set on the controller.
The sunset is the same as the sunrise period where the user would set a time for the main fixture to start dimming leaving the infill bars on. At the finish time both the main fixture and the infill bars will go off.
This setting only works when controlling the ControlLed satellite LED fixture. This functionality allows your plants to grow under a predominately blue light, it allows the user to independently increase the near red diodes as the plant moves though its cycle into the flowering stages.
This comes in very useful in hotter periods of the year when grow room temps are hotter than usual. You can set the temperature at which the lights start dimming. The lights will dim until the room temperature is stable allowing the lights to turn up in intensity.
